UconX® CAT6 Patch Cables
CAT6 network patch cable is a cost-effective solution for indoor data center applications. It supports up to 1000BASE-T within 100m and 10 Gigabit Ethernet over the limited distance per industry standards. In addition, it’s fully backward compatible with all prior categories.
The UconX CAT6 patch cable’s conductors apply oxygen-free copper with high electrical conductivity and low signal transmission attenuation. The sheath material is an environmentally friendly material PVC CM. This material is durable, flame-retardant and resistant to bending.
UconX CAT6 patch cables feature molded boots with a bump design for protecting the clip during usage and stranded wire for repeated flexing and movement without micro-cracking of the copper. Our cables use a short body plug design that minimizes de-twisting of the pairs during the manufacturing process, assuring the highest available performance and employ a flush boot that allows the cables to fit side by side in high density patch fields.
|Cable Type||Cat6 Snagless||Shielding Type||Unshielded (UTP)|
|Cable Jacket||PVC CM (Round)||Available Lengths||1ft, 2ft, 3ft, 5ft, 6ft, 7ft, 10ft, 15ft, 30ft, 50ft (Including Plugs)|
|Conductor Material||Oxygen-free Copper||Conductor Type||Stranded|
|Data Rate Support||1000Base-T and Maximum to 10GBase-T||Standard Bandwidth||250MHz|
|Gauge (AWG)||24 (7/0.20mm)||Cable Outer Diameter (mm)||6.1 ± 0.4|
|Max Transmission Distance||100m||Twisted Pairs||4 Pairs|
|Wire Scheme||T568B, Straight||Standard||ISO/IEC 11801, ANSI/TIA-568-C.2|
|Operating Temperature||-10 to 70°C (14 to 158°F)||Installation Temperature||-10 to 60°C (14 to 140°F)|